Publication
Joon-Seok Kim, Do-Hyen Kim, June-Hee Lee and June-Seok Lee, "Copper-Loss-Minimizing Strategy based on Single Look-Up Table for Wound Field Synchronous Machine," in Proc. 2024 ECCE
In Proc
2024
PEEMS
-
Nov. 25, 2024
views
1. Authors: Joon-Seok Kim, Do-Hyen Kim, June-Hee Lee and June-Seok Lee
2. Title: Copper-Loss-Minimizing Strategy based on Single Look-Up Table for Wound Field Synchronous Machine
3. Published in: 2024 IEEE Energy Conversion Congress and Expositon (ECCE)
4. Date of Conference: 20-24 Oct. 2024
5. Conference Location: Phoenix, Arisona, USA
6. Abstract
: Wound field synchronous machines (WFSM) can be operated through a combination of three currents, including stator d-q axis current and field current. In addition, since inductance varies depending on changes in field current and stator d-q axis current, use of look-up tables (LUTs) becomes necessary. This paper proposed a method and sequence for fabricating a single minimum copper-loss LUT which has a current reference that reflects the nonlinear change in inductance of WFSM. The fabrication process of LUT proceeds in a way to find the minimum copper-loss current combination in the entire field current range by using the flux-torque LUT derived from several specific field currents. Therefore, if the LUT proposed in this paper is used, the WFSM can be controlled with the maximum torque with minimum copper-loss not only in the constant torque region but also in the field weakening region. The effectiveness of this method is proved by the experiment results.
- Nov. 25, 2024 Juyeon Lee, Suhyeon Kim,and June-Seok Lee," A Practical Carrier-Based Discontinuous PWM Method of Vienna Rectifier Considering Neutral-Point Voltage Fluctuation," in Proc. 2024 ECCE
- May. 16, 2024 Han-Vit Kim, Do-Hyeon Kim, and June-Seok Lee, "Comparison of Flux-Weakening Control Methods for Wound Field Synchronous Motor," in Proc. 2024 APEC